SALD-2300 - 規格

SALD-2300 雷射反射/散射式粒徑分布測定裝置

SALD-DS5

Cyclone Injection Type Dry Measurement Unit: SALD-DS5 (P/N: 347-61706-42[115V], 347-61706-44[230V])

System	Cyclone type
Communication method	USB (PC control)
Required power supply	115/230VAC(±10%), 100VA, 50/60Hz (excluding dust collector and compressor)
Dimensions & weight	W 240×D 310×H 210 mm, 10 kg
Operating Environment	Temperature: 10 to 30°C, Humidity: 20 to 80 % (no condensation)

顯示較少

SALD-DS5

Cyclone Injection Type Dry Measurement Unit: SALD-DS5 (P/N: 347-61706-42[115V], 347-61706-44[230V])

Primary pressure	0.6 to 0.8 MPa
Secondary pressure	0.05 to 0.5 MPa
Filtration rating	Removing particles of 5 μm or larger
Connection to air source	Tube of 6 mm outside diameter
Communication method	USB (PC control)
Required power supply	115/230VAC(±10%), 100VA, 50/60Hz (excluding dust collector and compressor)
Dimensions & weight	W 130×D 223×H 233 mm, 3 kg
Operating Environment	Temperature: 10 to 30°C, Humidity: 20 to 80 % (no condensation)

顯示較少

Compressor: Output	0.4 kW
Compressor: Minimum pressure	Approx. 7 kgf/cm² (approx. 0.69 MPa)
Compressor: Air discharge	45 L/min
Compressor: Tank volume	Approx. 30 L
Dust collector: Type	Vacuum cleaner (Paper pack type)
Dust collector: Dust collecting efficiency	More than 99% for 0.3 μm particles
Dust collector: Capacity	2.0 m³/min or more
Dust collector: Vacuum	Approx. 2000 mm Aq or lower
Dust collector: Suction hose diameter	Approx. 32 mm

顯示較少

WingSALD II

Measurement and Data Display Functions

Measurement of Particle Size Distribution	Allows measurements using measurement assistant function (interactive process based on SOP)
Refractive Index Setting	Automatic refractive index calculation function (LDR method: Light Intensity Distribution Reproduction Method) makes setting the refractive index easy.
Real-Time Display	Particle size distribution/light intensity distribution simultaneous display
Diagnostics/Adjustments	Self-diagnostic function and cell check function
Recalculation of Particle Size Distribution	Batch recalculation of max. 200 distributions
Display of Particle Size Distribution Data	Displays overlay of max. 200 distributions
Display of Light Intensity Distribution	Displays overlay of max. 200 distributions
Statistical Data Processing	Max. 200 sets of data (also allows overlaying max. 200 data sets)
Time-Series Processing	Max. 200 sets of data
3-Dimensional Graphing	Max. 200 sets of data
Data Transfer via Clipboard	[Image Output]: Outputs entire data sheet or graph only. [Text Output]: Outputs summary data, particle size distribution data, or light intensity distribution data.
Data Sorting	Sorts by file name, sample ID, sample number, or refractive index

顯示較少

WingSALD II

Output Conditions

Particle Size (μm) Divisions	Fixed 51 or 101 divisions : User settable 51 divisions
Particle Amount (%) Divisions	Fixed 51 divisions : User settable 51 divisions
Distribution Basis	Count, length, area, or volume
Expression of Cumulative Distribution	Oversized or undersized
Expression of Frequency Distribution	q, q / Δ×, q / Δlog ×
Smoothing Levels	10 levels
Distribution Function Fitting	Rosin-Rammler distribution, logarithmic Gaussian distribution
Data Shifting	±10 levels
Report Function	Single data sets (6 templates), overlaid data (5 templates), statistical data, time-series data, or 3D data can be selected and output using batch processing

顯示較少

WingSALD II

Data Analysis Functions

Scattering Angle Evaluation Function	Evaluates scattering characteristics within micro angle regions for samples such as optical films and sheets.
Data Emulation Functions	Emulates measurement results from other instruments and measurement principles, using SALD series measurement results.
Mixture Data Simulation Function	Simulates particle size distributions using any mixture ratio of multiple particle size distributions.
Data Connection Function	Combines two particle size distributions with different measurement ranges at any particle size point to create a single particle size distribution.
Continuous Measurement Function	Continuously measures changes in particle size distributions and particle diameters over time, at intervals as short as one second, and saves the results.

Note 4:The LDR method automatically calculates an appropriate refractive index based on consistency between the actual measured light intensity distribution and one reproduced (recalculated) from particle size distribution data. This method was developed by Shimadzu and published in two technical papers. It is sometimes called the "Kinoshita Method", in academic communities, after the name of Shimadzu’s engineer.

顯示較少

SALD-2300

Measurement Unit: SALD-2300 (P/N: 347-61700-42[115V], 347-61700-44[230V])

Measurement range	17 nm to 2,500 µm
Light source	Red semiconductor laser
Detection elements	84 elements
Options	Multifunctional variable-volume sampler, batch cell, highconcentration sample measurement system, cyclone injection type dry measurement unit

顯示較少

SALD-BC23

Batch Cell: SALD-BC23 (P/N: 347-61702-42)

Cell Material	Quartz glass
Required Liquid Volume	Approx. 12 cm³
Stirrer Mechanism	Up-and-down movement of blade
Dimensions & weight	W100mm×D120mm×H140mm, 0.8kg
Operating Environment	Temperature: 10 to 30°C, Humidity: 20 to 80 % (no condensation)

顯示較少

SALD-2300

General Specifications

Measurement principle	Laser Diffraction Method
Measurement range	17nm(0.017μm) to 2500μm
Measurement range	17nm(0.017μm) to 400μm
Measurement range	30nm(0.030μm) to 280μm
Measurement range	300nm(0.3μm) to 2500μm

Note 1: The measurement range varies according to the shape etc. of the particle.

顯示較少

SALD-2300

Measurement Unit: SALD-2300 (P/N: 347-61700-42[115V], 347-61700-44[230V])

Light source	Red Semiconductor laser (Wavelength 680 nm)
Light detector	Detector elements for UV semiconductor laser Total 84 elements (78 forward, 1 side, 5 back)
System Compliance	Class 1 Laser Product, CE compliant
Required power supply	115 or 230 VAC as ordered 100 VA
Dimensions & weight	W680mm×D280mm×H430mm, 31kg
Operating Environment	Temperature: 10 to 30°C, Humidity: 20 to 80 % (no condensation)

Note 2: Reference sample and USB cable (2 m) supplied as standard

顯示較少

SALD-MS23

Sampler: SALD-MS23 (P/N: 347-61701-42[115V], 347-61701-44[230V])

Dispersing bath	Capacity: 100～280cm³
Sonicator	Frequency about 32 kHz, output about 40 W
Liquid Pump	Radial pump, maximum flow rate 2000cm³/min
Liquid Pump Material	Stainless (SUS 304, SUS 316), Tetrafluoroethylene (PTFE), Perfluoroelastmor (FEP) or Kalrez, Thermoflon Pascal (inside)
Liquid Supply Pump	Diaphragm pump, maximum flow rate 750cm³/min
Liquid Supply Pump Material	Tetrafluoroethylene, polyvinyl dene fluoride
Flow Cell	Quartz glass
Required power supply	115 or 230 VAC as ordered, 200 VA
Dimensions & weight	W390mm×D520mm×H430mm,18kg
Operating Environment	Temperature: 10 to 30°C, Humidity: 20 to 80 % (no condensation)

Note 3: USB cable (2 m) supplied as standard

顯示較少

SALD-HC23

High-concentration Sample Measurement System: SALD-HC23 (P/N: 347-61703-42)

Cell Material	Borosilicate glass
Required Liquid Volume	Approx. 0.15 cm³
Dimensions & weight	W20mm×D100mm×H9mm, 0.2kg
Operating Environment	Temperature: 10 to 30°C, Humidity: 20 to 80 % (no condensation)

顯示較少

SALD-DS5

Cyclone Injection Type Dry Measurement Unit: SALD-DS5 (P/N: 347-61706-42[115V], 347-61706-44[230V])

Sample suction types	Cyclone type / One shot type / Hand shot type
Suction nozzle	Can be selected from 3 types

{"title":"\u898f\u683c\u6587\u4ef6\u4e0b\u8f09","description":"\u4e0b\u8f09\u6700\u65b0\u898f\u683c\u6587\u4ef6","source":"product","key":3514,"max":"30","filter_types":["spec_sheet"],"link_title":"View other Downloads","link_url":""} {"title":"\u4e0b\u8f09","description":"\u4e0b\u8f09\u6700\u65b0\u578b\u9304","source":"product","key":3514,"max":"30","filter_types":["brochures"],"link_title":"View other Downloads","link_url":"","pdf_links":[]}