4830 Controller - 規格
Servopulser Control Unit
Servo Controller 4830
Display unit |
5.7-inch color LCD |
---|---|
Control method |
Full digital two-degree-of-freedom PID |
Control signal input |
Test force (TD1), stroke (TD2), and external input (AUX) |
External input/output |
Analog Output: 4 channels (±10 V), Input: 1 channel (±10 V) |
Other functions |
Calculation function (such as adding, subtracting, averaging, and stress/strain), push testing function, consumable consumption time management function |
Communications functions |
USB interface |
Limit functions |
Measurement value 4-point limiter, cycle counter, external input |
Control functions |
Amplitude, average gain correction (AGC), PID autotuning, sample anti-overloading function (contact load), user-specified phase differential control by synchronized operation, waveform distortion correction*1(transfer function correction) |
Size |
W350 × D420 × H148 mm |
Control panel |
Touch panel, function keys, jog dial, numeric keypad, test operation keys, power unit operation keys |
Measurement functions |
1 range (rangeless) 24-bit |
Waveform display functions |
Time, X-Y, and peak waveforms |
Test parameter registration |
Max. 9 parameters |
Slow settings |
Slow start/stop |
Test frequency |
0.00001 to 1000 Hz |
Test waveforms |
Sine, triangular, rectangular, haversine, haver-triangular, trapezoidal, ramp, 1/2 haversine, step, sweep, and random waves, external input, programmed waves (optional*1), file waves optional*1) |
Power Requirements |
Single-phase AC 100 to 230 V*2 50/60 Hz 300 VA |
*1 Only during software use
*2 The standard power cord included with the system is only for AC 100 V.